Speed Gems Transmission Adapters  



About Us & Magazine Articles




Kit Pricing




Other Products


Installation Instructions


Machining Services




GM Ecotec

engine to Chev automatic trans!



This Ecotec engine came from a 2002 Olds Alero. It's a north-south engine now with a 2004R transmission mounted to it. This kit will work with any Chev case automatic transmissions and some manual transmissions.


This kit consists of a 1 inch thick adapter plate made out of 6061 T6 aluminum, a crank adapter, a custom flexplate if you have a supercharged or turbocharged engine, a torque converter drive plate, and a bolt kit. You use the stock starter and flexplate from the Ecotec engine. Because of interfering parts, you can only use Chev automatic transmissions. Call us for info on putting a manual trans on this kit. 


We are selling this kit for $895.00 We also have the worlds best lockup controller available for an additional $178.00. Complete transmission and adapter packages are available.


The kit fits all 2.0, 2.2, 2.4 engines, with or without Supercharger or Turbocharger. There is some cooler line fabrication that needs to be done on the Turbocharged engines.  The adapter plate can be incorporated into the oil cooler system.







Bendtsen’s Transmission Center Inc.  763 767 4480

13603 Johnson St NE,  Ham Lake, MN. 55304



We accept the following credit cards:

Copyright © 2002 Bendtsen's Transmission Center Inc. All rights reserved.