Materials Included: (1) Adapter Plate - 1935 Chevy 208 to 1984-92 S10 T5(4) FHSCS 3/8-16 x 1-1/4(4) SHCS 7/16-14 x 1 *Matching our adapter kits w...
View full details
Materials Included: (1) Adapter Plate Ford Car with Steel Bellhousing to Chevy S10 T5(4) FHSCS 7/16-20 x 1-1/4(4) SHCS 7/16-14 x 1 *Matching our a...
View full details
Materials Included: (1) Buick Tapered Pilot Bushing (PB10009)(1) Flexplate (FP10003)(1) 166W-tooth Ring-gear (RG10004)(1) Balance Weight for Buick ...
View full details
Materials Included: (1) Adapter plate - 1995-98 Ford T5 to Chevy 55 & newer Bellhousing(1) Bearing Race Shim(2) FHSCS 1/2-13 x 2(2) HCS 3/8-16 ...
View full details
Sold out
*CALL TO ORDER* Speed Gems806H S. Division St., Waunakee, WI 53597PHONE: (763) 767-4480EMAIL: sales@transmissionadapters.com
Sold out
*CALL TO ORDER* (1) Adapter Plate – Seagrave V12 to Chevy V8 Transmission(1) Crank Adapter - Seagrave V12 to Chevy V8 Transmission(1) Flexplate(1) ...
View full details
Materials Included: (1) Adapter Plate Ford Ecoboost 2.0/2.3 to Chevy(1) Crank adapter(1) Torque converter spacer(1) Torque converter drive plate(2)...
View full details
Note: THE TORQUE TUBE WILL NEED TO BE CONVERTED TO A MODERN DRIVESHAFT TO BE ABLE TO ADAPT TO A NEWER TRANSMISSION TAILSHAFT FLANGE OR TRANSFER CAS...
View full details
*Please indicate what year your engine is in the comments when ordering.1957-63 has a 2.00" Crank I/D1964-66 has a 1.70" Crank I/D*Please indicate ...
View full details
Materials Included: (1) Adapter plate - 223 to Chevy(1) Crank adapter - Ford 239 to Chevy auto trans(1) Flexplate(1) High torque mini starter(4) S...
View full details
Note: THE TORQUE TUBE WILL NEED TO BE CONVERTED TO A MODERN DRIVESHAFT TO BE ABLE TO ADAPT TO A NEWER TRANSMISSION TAILSHAFT FLANGE OR TRANSFER CA...
View full details
Note: This kit will also work for a C5, C6. If you plan on using a C4, be sure that you have the larger 164 tooth flexplate style bellhousing (For...
View full details
Speedometer Cable Adapter for Ford Transmission
*CALL TO ORDER* Speed Gems806H S. Division St., Waunakee, WI 53597PHONE: (763) 767-4480EMAIL: sales@transmissionadapters.com *This Kit is designe...
View full details
This product is needed if you are installing the Ford AOD Transmission into anything other than a stock application.
Sold out
*CALL TO ORDER* Speed Gems806H S. Division St., Waunakee, WI 53597PHONE: (763) 767-4480EMAIL: sales@transmissionadapters.com
*CALL TO ORDER* Speed Gems806H S. Division St., Waunakee, WI 53597PHONE: (763) 767-4480EMAIL: sales@transmissionadapters.com
Allows for building a 27-inch long 700R4 transmission utilizing a 4x4 output shaft. Comes with bushing, seal and O-ring. NOTE: 27-inch yoke must b...
View full details
Cures leaking Speedometer Cable attachment point for the TH350 Transmission. Brand new part comes with Seal and O-ring.
Useful for putting Ford AOD Transmissions into 1955 - 1957 T-Birds and other Ford Products.
This cable has the standard GM thread on the one end and 1950's era thread, that was common on all car lines, on the other. Example: Putting a 700R...
View full details
Used for engines that have timing marks on the flywheels that are being replaced, like the 216/235 Chevy 6-Cylinder.
Useful for when there isn't enough space for the Speedometer to curve/bend around desired areas.
Please Note: We have back-ordered bellhousing castings due in 4-5 weeks. Please give us a call for confirmation. NOTE: Due to the nature of the ...
View full details
