Materials Included: (1) Bell housing - 1949 Old/Cad to Chev Manual(1) Flywheel (1) Starter(1) Starter Block - Multiple Olds/Cad applications(1) 10....
View full details
Materials Included: (1) Adapter plate - Olds/Cadillac 1949-1964 to Chev(1) Crank Adapter - Olds/Cadillac 1949-1964 to Chev(1) Crank Spacer - 1949-1...
View full details
Materials Included: (1) Adapter plate - Olds/Cadillac 1949-1964 to Chev(1) Crank Adapter - Olds/Cadillac 1949-1964 to Chev(1) 143N Tooth Ring Gear(...
View full details
Materials Included: (1) Adapter plate - Olds/Cadillac 1949-1964 to Chev(1) Crank Spacer - 1949-1964 Olds to Chev transmission(1) Early Olds Crank A...
View full details
Materials Included: (1) Adapter plate - Packard 288/327/359 straight 8 to Chev(1) Crank Spacer - Packard 288/327/359 straight 8 to Chev automatic t...
View full details
Materials Included: (1) Adapter plate - Packard V8 to Chev (1) Crank Adapter - Packard V8 to Chev(1) Torque converter drive plate(1) Carburetor Fla...
View full details
Materials Included: (1) Adapter plate - Packard 356 straight 8 to Chev(1) Crank Spacer - Packard 356 straight 8 to Chev automatic transmission(1) F...
View full details
Materials Included: (1) Crank Adapter - 1955-1960 Pontiac V8 to Chev automatic transmission(1) Adapter Plate 1955-1964 Pontiac 2.59" crank flange (...
View full details
Materials Included: (1) Adapter plate - 1955-1964 Pontiac V8 to Chev auto(1) Crank Adapter - 1955-1960 Pontiac V8 to Chev automatic transmission(1)...
View full details
Materials Included: (1) Adapter plate - inner - Pontiac straight 8 to Chev auto(1) Adapter plate - outer - Pontiac straight 8 to Chev auto(1) Crank...
View full details
Materials Included: (1) Pont starter adapter plate(1) Pont starter shim(1) Pilot bushing(1) Flexplate Pont with 2.75 inch crank(1) 166W Tooth Ring ...
View full details
Materials Included: (1) Adapter plate - 1955-1964 Pontiac V8 to Chev auto(1) Crank Adapter - 1955-1960 Pontiac 2.9" crank flange(1) SB10002 Starter...
View full details
Useful for when there isn't enough space for the speedometer to curve.
Allows you to build 27 inch long 700R4 transmission utilizing 4x4 output shaft. Comes with bushing, seal and O-ring. Note: 27 inch yoke must be sho...
View full details
Useful for putting Ford AOD transmissions into 1955 through 1957 T-Birds and other Ford Products
Cures leaking speedometer cable attachment point. Brand new part comes with seal and O-ring.
This cable has the standard GM thread on the one end and 1950's era thread that was common on all car liens on the other. Example: Putting a 700R4 ...
View full details
Materials Included: (1) Adapter plate - Studebaker 8 cylinder to Chev auto(1) Crank Adapter - Studebaker 8 cylinder to Chev automatic transmission...
View full details
Used for engines that have timing marks on the flywheels that are being replaced, like the 216/235 Chev 6 Cylinder
This product is needed if you are installing the Ford AOD trans into anything other than a stock application
