Ford FE to 6R80 Automatic Transmission Adapter Kit Installation

Ford FE to 6R80 Automatic Transmission Adapter Kit Installation

Previous article Ford 2015-2020 2.0/2.3L Ecoboost to Chev Adapter Kit Installation
Next article Ford FE Manual Transmission Adapter Kit Installation


Harland Easton - April 2, 2024

Hi want put 6r80 transmission behind 1967 Fe in my 1964 fairlane pro street what can be. Done make this work

Mike Pera - August 23, 2022

Hi, I have a 72 F 250 2wd with a FE 390/C6. I want to replace the C6 with a 6R80, and I was wondering if your FO203 kit offered a rear crossmember for this application. Any help would be great.
Thank you, Mike P

David J Smith - May 3, 2022

Hi, I am Building a 69/70 Ford Shelby GT500 Tribute Car with a Nelson Racing Engine Twin Turbo Windsor Based 1000HP using 91 Octane Fuel (i am located in California) and I want to use the newer 6R80 or the Newer 10R80 Auto Trans!…Can you Help Me?…Thank You and God Bless! :-)

Ted Davis - April 11, 2022

With the 6r80 adapter kit does it matter if the engine was a 5.4l or a 5.0l

Bob Dinnen - March 15, 2022

Hi , I have a 1963 Ford fe 427ci engine that I would like to put a 6R80 behind it. I like
what I see in your adapter kit installation video. Please send me all your information
along with the price of your kit .

Olaf Iversen - March 15, 2022

Hi, needing some help.
we have a 66 galaxie with factory 390fe / C6. We are planning to install a high performance 4l60e once 390 engine work has been completed. What will be tge cost for an adapter plate to suit, and starter type??

Robert McKee - July 19, 2021

I will be ordering this soon for my 67 f100. Glad they make it because I do not want to get rid of my 352 but need OD. The 6R80 is awesome and tough. I have a 64 F100 with a 514 I will be doing also.

Denis B Butler - February 8, 2021

Having built a FE 390 stoker professionally built to roughly 500 HP.
the motor will be going into a 1976 F250 High boy.
I am interested in the 6R80, Has this combination been done before or should i just stay with a strong rebuilt C6.
Any information will be greatly appreciated.

Colin - September 1, 2020

Hello I have a 1969 mach1 mustang 428 scj I am really interested in the adaptor kit you have engineered
Could you please where and how and how much it will cost to buy one.
Kind regards Colin

Charles Buzbee - September 1, 2020

How much torque/ horsepower can the 6R80 take? Are there performance parts and converters available for it?

Leave a comment

Comments must be approved before appearing

* Required fields