SBF to 6R80 Kit Now Available!

SBF to 6R80 Kit Now Available!

Good news everyone! Our SBF to 6R80/Modular transmission adapter kit is now up on our website and ready to ship. There is a limited Supply on this first run! Hurry up and get yours ordered Today!!! We also have options for you to include a US Shift Stand-Alone transmission computer with your kit. When bundled you'll save on the cost of your kit!!

 We are really excited on how well this kit turned out. It requires no cutting or grinding of your bellhousing keeping the strength in the bellhousing. 

The adapter plate is made from a single piece of 6061 billet aluminum. Also, we made our crank spacer from billet 6061 as well. We have made sure to remove as much material as safe. It weighs in at about 13lbs which should minimally impact performance of your engine. 

Please call, email or message us on Instagram and Facebook

Previous article COVID-19 UPDATE
Next article Ford 429 460 to Modular Transmission Adapter Kit Installation

Comments

Dale Whitaker - April 15, 2023

regarding the Small Block

C Edmonds - February 27, 2023

Do you do an electronic control computer kit for 6r80 as well. If not, will my megasquirt run it?
Really looking for more gears for my 351w turbo.

Jason Kivett - November 21, 2022

Do you have adapters that will allow me to bolt up a 6r80 behind a ford 300 I6. Researching my plans for my F100 truck project.

Kent Fortner - October 26, 2022

Interested in a price for an adapter for a Ford Blueprint 302 going into a 67 Mercury Cougar

robert j flick - April 11, 2022

what is the price deciding on a c6 or a chevy trans price makes the difference

Gary Bright - March 15, 2022

I am putting a 6 hour 80 on the back of A351 Windsor I need to know how much your kit costs to do that

Jeremy - March 15, 2022

Are you guys going to do a BBF to 6r80 adapter? Your kit looks much better than performance automatics

Austin Price - March 15, 2022

Could you list the overall plate thickness as well? Some of us bronco guys have short driveshafts to worry about

William Givings - March 22, 2021

I HAVE A 75 VEGA 350ENG I NEED A ADAPTER TO MATE WITH A3 SPEED 4 CYLINDER TRANSMISSION. CAN YOU HELP ME? BILL GIVINGS 773-251-6974 CELL

Nick Mucciarone - February 8, 2021

Great piece! Does it fully enclose the bottom lip, or are there gaps exposing the inner bell? Assuming original ’69 sbf 302 block plate can fit?

Leave a comment

Comments must be approved before appearing

* Required fields