PA201 1955-1956 Packard 320/352/374/400 V8 to Chevy 700R4/Automatic Transmission


Materials Included:

(1) Adapter Plate - Packard V8 to Chevy
(1) Crank Spacer - Packard V8 to Chevy
(1) Torque Converter Drive Plate
(2) Dowel Pin 0.625 x 1
(6) FHSCS 7/16-14 x 1
(6) SHCS 7/16-20 x 3
(6) 7/16-20 x 3/4 Flexplate Bolts
(6) STUD 3/8-16 x 1-3/4
(6) HEX NUT 3/8-16
(6) Threaded insert 7/16-20
(3) 7/16 ET Hard Washer
(3) 7/16 Flat Washer

Driveshaft for this Application:

After the Transmission install is complete, take the driveshaft to a reputable driveshaft builder. The front trunnion type U-joint will need to be replaced with a slip yoke that matches the Transmission that is being used.

NOTE: If the application is on a 1956 Packard with the electric shift column, there is a solution for using the original, stock push button shift assembly.

*Matching our adapter kits with your engine can be tricky. If you are unsure of which kit to purchase for your engine, please call customer service at (763) 767-4480. Speed Gems is not responsible for return shipping costs of mismatched kits.

    Installation Instructions