MT501 Chevy S10 T5 1993-1996 to early Chevy 216 3 & 4-speed Bellhousings (w/ Floor Shift)

Materials Included:

(1) Adapter plate - 1993-1996 Chev S10 T5 to early Chevy 216 4-speed Bellhousings
(1) Stud Plate Long
(1) Stud Plate Short
(2) FHSCS 1/2-13 x 1-1/4 
(2) SHCS 1/2-13 x 1
(2) SHCS 7/16-14 x 1
(4) FHSCS 5/16-18 x 1/2
(2) Hex Nut 7/16-14

This BELLHOUSING ADAPTER PLATE allows you to bolt a 1993 thru 1996 S10 T5 5-speed Transmission onto the early Chevy 216 that came with a floor shift 3 or 4-speed Transmission.

NOTE: The 3-speed column shift Transmissions had a different bolt pattern.

*We also sell the Adapter Plate for the 3-speed column shift application - Also listed on our website.

NOTE: You continue to use the stock Chevy 216 Flywheel, pressure plate, throw-out bearing, starter, and pilot bushing.
However, the clutch plate needs to be replaced with a 26-spline disc that matches the diameter of the original.


*This plate will also let you bolt on a 1996 to 2002 Camaro T5 from a 3800 V6 car. To do so, you just need to install a front bearing retainer from a 1993 to 1996 S10 T5. The Camaro shifter is about 12 inches further back than the S10 Transmission.

*This plate will also let you bolt on a 1983 to 1993 Ford T5. To do so, you just need to use a Chevy front bearing retainer on the Ford Transmission.

Speed Gems Transmission Adapters are machined right here in the U.S.A.!

*Matching our adapter kits with your engine can be tricky. If you are unsure of which kit to purchase for your engine, please call customer service at (763) 767-4480. Speed Gems is not responsible for return shipping costs of mismatched kits.